Follow

Installing Drivers for G3 Devices

If you plug G3 units into your computer for the first time and they do not show inside the VX Sport Software, the drivers may not have loaded properly. To fix this you can install them manually.

  1. Open the start menu and type "Device Manager". If this does not appear, you can also find it inside the Control Panel.
  2. Scroll down to "Universal Serial Bus Controllers" and expand the list. Locate "USBXpress Device" and right click.
  3. Click "Update Driver" and then click the "Browse my computer for driver software."
  4. Click browse to open up your file explorer.
  5. Scroll down until you find "C Drive," from here open up Program Files (x86) > VX Sport > USBXpressDrivers and then click OK.
  6. Make sure the box "Include Subfolders" is ticked and then click Next.
  7. The drivers will now install, when finished click close.
  8. It will then prompt you to restart your computer for these hardware changes to take effect.
  9. If units are still not showing up, download and extract the attached zip folder at the bottom of this article and try the above steps 2-7 again. These drivers often work for newer PC's that are having the issue.
  10. After restarting, your units should now show up in VX View, if you are still having issues please contact support@vxsport.com .
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk